Changing Tyres on Your CFMoto 800MT

Changing tyres on your CFMoto 800MT is a straightforward process that you can do at home with the right tools and a bit of patience. Here’s a step-by-step guide to help you through the process.

Tools and Materials Needed

• New tyres (make sure they are the correct size for your 800MT)
• Tyre levers
• Rim protectors
• Bead breaker (optional but helpful)
• Valve core remover
• Air compressor or hand pump
• Soapy water or tyre mounting lubricant
• Torque wrench

Step-by-Step Guide

1. Preparation:
   • Park your motorcycle on a stable surface and use a paddock stand or center stand to lift the bike off the ground.
   • Remove any luggage or accessories that may obstruct access to the wheels.
2. Remove the Wheels:
   • Loosen the axle nuts and remove the wheels from the motorcycle. Refer to your owner’s manual for specific instructions on wheel removal.
3. Deflate the Tyres:
   • Use the valve core remover to take out the valve core and let all the air out of the tyre.
4. Break the Bead:
   • Use a bead breaker tool or carefully use tyre levers to break the bead of the tyre away from the rim. Be cautious not to damage the rim.
5. Remove the Tyre:
   • Insert rim protectors between the tyre and rim to prevent damage.
   • Use tyre levers to pry the tyre off the rim, working your way around the tyre until it is completely removed.
6. Install the New Tyre:
   • Apply soapy water or tyre mounting lubricant to the bead of the new tyre to make installation easier.
   • Position one side of the tyre onto the rim and use tyre levers to work the tyre onto the rim, being careful not to pinch the tube if you are using one.
   • Repeat the process for the other side of the tyre.
7. Inflate the Tyre:
   • Reinsert the valve core and use an air compressor or hand pump to inflate the tyre to the recommended pressure specified in your owner’s manual.
8. Reinstall the Wheels:
   • Place the wheels back onto the motorcycle and tighten the axle nuts to the specified torque using a torque wrench.
9. Final Checks:
   • Spin the wheels to ensure they are properly seated and balanced.

• Check the tyre pressure again and adjust if necessary.

Conclusion

Changing your tyres on the CFMoto 800MT can be done with some basic tools and patience. Always ensure you follow safety guidelines and refer to your owner’s manual for specific details related to your motorcycle. If you’re unsure about any step, consider seeking assistance from a professional mechanic. Happy riding!